Mostrando postagens com marcador passo a passo. Mostrar todas as postagens
Mostrando postagens com marcador passo a passo. Mostrar todas as postagens

segunda-feira, 19 de agosto de 2013

Troquinha - Swap

Eba, tanto eu quanto a Adriana recebemos nossas caixas com a troquinha bem rápido!
Yay! Both Adriana and I got our swap boxes really fast!

E finalmente posso revelar o que fiz para ela... :) Ela tinha pedido algo no estilo "Shabby Chic", que até então nunca tinha feito nada. E também disse que adorava biombos... Então foi o que fiz. Não parece uma linda cena antiga, vitoriana? :)
And now I can finally reveal what I made for her... :) She asked for a bed in "Shabby Chic" style, a style I have never done before. And she also said she loved folding screens... So, that's what I made! Doesn't this picture look like an authentic Victorian bedrom? :)



Aqui está a foto embaçada que tinha publicado antes e a foto nítida:
And here is the blurry picture I had published before next to focused one:


A seguir, só fotos. Eu que fiz a cama toda, e o biombo. A mesa (estrutura), eu já tinha, só fiz acabamento e o tecido. O abajur e a colcha de crochê vieram em um lote que comprei da Gayle e do John Constable, do Canadá. Achei que iam ficar muito bem no conjunto. 
Next, just pictures. I made the bed from scratch, and the folding screen. The table (the structure itself) I already had, just did the painting and the skirting. The lamp and the crochet bedspread came in a lot I bought from Gayle & John Constable, from Canada. I thought they'd be a perfect match! The memories set I already had too.














Fiz um tutorial para o Biombo e postei no DHB Club. Para entrar no club é só seguir este link e fazer o registro ou usar sua conta no Facebook. Se não conseguir ver na hora é porque é preciso aprovar sua conta antes. O registro é GRÁTIS, a aprovação só é necessária para evitar a entrada de spammers. 
I made a tutorial on how to make this folding screen. I posted it on DHB Club, a social network for miniature enthusiasts only. It's FREE, and to join it all you have to do is follow this link. There you can either register or link using your Facebook account. If you can't see the tutorial post right away, it's because your registration has to be approved. This will happen soon, and then you'll have full access. The need for approval is necessary to keep the community spammers-free.


E aqui estão as peças que ganhei da Adriana. Foi ela quem fez os móveis. A "pia" é de uma coleção da Planeta Deagostini que ela tinha duplicata, ofereceu uma e eu quis. Uma torneira descolou no transporte, mas tudo bem porque eu já estava planejando usar separado mesmo. Ela tem muito talento mesmo! Eu nunca consigo fazer 4 pernas cabriole iguais!!!
And here are the furniture pieces I got from Adriana. She made them all. Only the "sink" is from a collection by Planeta Deagostini. She had a duplicate and offered me one, which I gladly accepted. One of the taps got detached during transportation. But this is not a problem, as I was going to break that part apart and use them separately anyway. She's really talented! I can never manage to make all 4 cabriolet legs match!!! 



.

quinta-feira, 14 de junho de 2012

Tutorial de cama - Bed Tutorial

Quando eu fiz o Quarto de Menina, em setembro do ano passado, um seguidor e conhecido de outros grupos perguntou se eu faria um tutorial da cama. Quando fiz a cama de menina, não tirei foto nenhuma do processo. Resolvi fazer outra agora, só para criar o tutorial. Desta vez não usei o Pretty Pleater, para mostrar uma alternativa com materiais que se encontram no Brasil. Mas recomendo MUITO comprar e usar esta ferramenta, é MUITO útil! A inventora (Danne Ruff) vende no site dela, aceita Paypal e despacha para o Brasil.
When I made a Little Girl's Room, in September 2011, a follower and friend from Yahoo groups asked if I was going to publish a tutorial on the bed in it. I hadn't taken any pictures while making the bed, so it was not possible. So, I decided to make another one, just to make the tutorial. I tried to use only materials that can be found in Brazil, so this time I did not use the Pretty Pleater. But I strongly recommend it! The inventor of this wonderful tool, (Danne Ruff) sells them on her website.

Lista de Materiais:
  • Placa de espuma (usada para embalar encomendas) ou de EVA
  • Caixa do tamanho da cama. No caso, usei uma com 15 x 5 x 9 cm
  • Tecido de algodão com padrões à escolha
  • Moldes recortados em cartolina (baixe arquivo pdf aqui)
  • Cartão paraná ou papelão para a cabeceira
  • Fita fina para acabamento
  • Estilete, régua, tesoura afiada, lapiseira
  • Cola (cola pano, cola de silicone ou cola branca secagem rápida são as melhores opções)
  • Spray de cabelo ou spray de gel para cabelo diluído em água (1 parte gel, 3 partes água) - teste antes em um pedaço do tecido para ver se não mancha!
  • Muitos palitos de dente e fita dupla face (não estão na foto)
Material List
  • Foam or EVA sheet - aprox 1/8" thick
  • Box the size of the bed. I used one that measured aprox 6 x 2 x 3 1/2in
  • Cotton fabric of your choice
  • Patterns for headboard cut from bristolboard (download pdf file here)
  • A piece of hard cardboard for the headboard
  • Tiny rickrack or 1/8" ribbon for trimming
  • Craft knife, ruler, sharp scissors, pencil
  • Glue (tacky or fabric glue are best. I used Aileen's)
  • Hair spray or hair gel diluted in water (1 part gel for 3 parts water) - test on piece of fabric first to see if it won't stain it!
  • Lots of toothpicks and double-sided adhesive tape (not in picture)
Material necessário
Materials needed
Instruções:
1) Forre um dos lados da caixa com a espuma/EVA. Deixe sobrar uns 6mm em três lados (menos o da cabeceira). Corte a quina para evitar sobras e cole a sobra nas laterais. Segure com fita crepe até a cola secar.
Instructions:
1) Glue the foam/EVA sheet to one side of the box (the top one). Leave about 1/4" extra on 3 of the sides, but cut flush to the "headboard" side. Glue those to the sides, holding with masking tape until dry.


2) Recorte os moldes da cabeceira em cartolina e no cartão paraná, e recorte os tecidos, como indicado na foto, deixando cerca de 1 cm de folga.
2) Cut the headboard patterns on Bristol board paper and cardboard, and cut the fabric as show in pictures, leaving about 1/4" rim.

3) Recorte uma tira que seja cerca de 1 cm mais larga que a lateral da caixa. Esta tira tem que ter um comprimento igual ao dobro da medida de três lados da caixa (o lado onde vai a cabeceira não conta).
3) Cut a strip of fabric that is about 1/4" wider than the side of the box, and 2 times as long as the 3 sides together (except the "headboard" one).

4) Dobre e cole as laterais da tira como ensinado no tutorial da cortina. SEMPRE espalhe a cola delicadamente para não vazar para o outro lado do tecido! Passe bem todos os recortes de tecido antes de continuar.
4) Fold and glue the rim sides of the strip, as I showed for the curtains tutorial. ALWAYS spread the glue before gluing, so as it won't "bleed" to the other side of the fabric! Iron all fabric pieces well before you proceed.

5) Cole duas tiras da fita dupla-face na superfície de trabalho. Cole os palitos como na foto, deixando um pequeno espaço entre eles para o tecido passar (cerca de 1 mm).
5) Glue two strips of double sided tape on the working surface. Glue the toothpicks as shown on picture, leaving some space between them to fit the fabric (about 1/16").

6) Vá encaixando a tira nos palitos, com ajuda de cartões de crédito, como mostrado na foto. Mantenha um cartão segurando o tecido e encaixe com o outro. Segure este, use o outro cartão para encaixar no próximo espaço e assim por diante. A fita dupla-face irá segurar o tecido no lugar.
6) Insert the fabric strip into the spaces, using two credit cards (or similar) to help you. Use one to hold fabric in place while pushing a new part of the fabric into the next "slot". Hold this one down and use the first one to push the next part and so on. The double-sided tape underneath will hold the fabric in place.



7) Aplique o spray de cabelo ou gel. Espere secar completamente. Pode usar secador de cabelo para acelerar. Use no fraco para não deformar a placa de corte nem tirar o tecido do lugar.... Depois de seca, retire com cuidado. Repita o processo até ter marcado a tira inteira.
7) Apply hairspray or the hair-gel/water mixture all over it. Wait until it dries completely. You may use hair drier to speed up, but use the lower speed/heat so as not to warp the cutting mat neither push fabric out of place... After completely dry, remove carefully. Repeat the process until the whole strip is pleated.

8) Enquanto espera secar, cole a espuma no detalhe da cabeceira, e os tecidos nos moldes como na foto. Recorte nas curvas e cole a sobra para dentro.
8) While you wait for it to dry, go ahead and glue foam on the template (Bristol board) for the headboard detail. Glue the fabric pieces onto the templates, as shown on picture.  Cut some "V"s to help folding and glue trim on the other side of the templates.



9) Cole o molde de cartolina forrado sobre o molde de papelão forrado, avesso sobre avesso. Cole a parte de espuma, já forrada, sobre a parte de papelão. Reserve.
9) Glue Bristol board template (already with fabric) on the cardboard one, back to back, as shown on picture. Glue the foam ornament on top of the thicker side of the headboard. Set aside.


10) Recorte o tecido para a colcha, de modo que sobre 2 cm de cada lado da caixa. Cole as laterais primeiro. Depois cole o lado da cabeceira e dos pés da cama. Veja nas fotos.
10) Cut fabric to cover the "bed", with an extra inch on each side as rim. Glue sides first and then "head" and "foot" of the bed, as shown on pictures. 
Cabeceira da cama
"Head" side of the bed
Pé da cama
"Feet" side of the bed
 11) Depois da tira lateral ter secado, comece a colar na lateral da cama. Cole só cerca de 1 cm na cabeceira, para não fazer volume. Cole mais juntinho na curva (veja foto) para ficar mais natural.
11) After the pleated fabric strip is completely dry, start gluing to the sides of the bed. Glue just about 1/4" to the back of the "head" part (so as not to "bulk up"). Gather the pleats together when gluing the corners of the "skirt" to the "bed" for a more natural look (check picture).



12) Cole o acabamento que tiver escolhido, ocultando a emenda dos tecidos.
12) Glue whichever trimming you chose, so as to hide the top of the pleats and make a more natural transition.

13) Cole a cabeceira na cama. Segure bem até a cola secar.
13) Glue the headboard to the bed. Hold in place until dry.
14) Para os travesseiros, recorte uma tira da espuma ou EVA com 3 vezes a altura do travesseiro que quer e 1 vez a largura.
14) To make pillows, cut another strip of the foam or EVA sheet, which should be 3 times as desired pillow  "height" in length and the same "width" of the pillow.

15) Dobre em três como na foto e cole. Coloque um peso por cima até secar.
15) Fold in three and glue, as shown on picture. Put some weight on top to hold in place until dry.

16) Recorte uma tira de cada tecido, cerca de 1 cm mais larga que a altura do travesseiro e 1,5 vez o comprimento. Cole as laterais, e depois cole como na foto, deixando uma abertura para inserir a espuma (o "travesseiro".
16) Cut another strip of each fabric, about 1/4" wider than the desired width of the pillowcase and 1 1/2 longer than it. Glue rim in and then fold and glue as shown in picture, leaving an opening to insert the "pillow".


17) Pronto!!! É só colocar os travesseiros no lugar e sua cama está pronta!
17) It's ready!!! All you have to do now is place the pillows on the bed and enjoy!
A cama pronta!
The finished bed!
A cama "original" :)
The "original" bed :)
Para uma cama de menino, eu teria usado o mesmo sistema da cortina, que ficaria mais natural. Mas quis mostrar como fazer dobras com um sistema alternativo, então aproveitei o tutorial para isso.
To be honest, for a boy bed I'd have pleated the skirt the same way as I worked on the curtains, for a more natural look. But as I wanted to show an alternative way to make pleats, the bed tutorial was a good 'excuse'... :)

Espero que tenha gostado!!! Mande fotos das suas criações, ok?
I hope you enjoyed this tutorial!!! Send me pictures of your creation, ok?

segunda-feira, 21 de maio de 2012

Micromini kit: como se monta um - how to

Se você segue meu blog deve ter notado que estou passando por uma fase meio... micromalista... :) Tenho feito várias micro-minis. E várias pessoas que vêem as minis pessoamlente perguntam: "mas como é que você consegue fazer isso, é tão pequenininho!!!" ou então "nossa, você deve ter mãos muito firmes!" ou "minha mão é grande demais para isso!..."
If you follow my blog, you must have noticed that I've been going to a very 'micro' phase... :) I've been making several microminis. And those who can see them in person often ask me things like: "how on earth do you make those tiny things, they are so small!!!" or "wow, you must have very steady hands!" or even "my hand is too big to work this size!..."

Bem, na verdade é mais uma questão de jeito e ferramentas adequadas: pinças de qualidade e ponta bem fina, cola, lâmina de corte fina, lentes de aumento e... palitos!!! :) Isso mesmo, uma das melhores ferramentas já criadas, rsrs... Já fiz alguns móveis do zero, Anna-Carin generosamente disponibiliza vários tutoriais em escalas menores. Mas a maioria é mesmo de kits. Gosto muito dos kits da Susan Karatjas, da SDK. As partes são cortadas a laser, que tem uma precisão maior que cortar à mão com estilete, e são cortados em lâminas de madeira tão finas quanto uma folha de cartolina. Hoje vou mostrar como é montar um desses kits, de uma mesa de centro, do começo ao fim. É um trabalho delicado, exige leveza nas mãos, movimentos suaves, uma boa dose de paciência e excelentes lentes de aumento. Mas mesmo quem tem mãos grandes como eu consegue fazer! ;) 
Well, actually it's more a matter of proper technique and tools: high quality fine point tweezers, tacky glue, one side blade, magnifying lens and... toothpicks!!! :) Yes, that's correct: it's one of the best tools ever created, lol... I've already made micro (1:144) furniture from scratch. Anna-Carin generously shares some tutorials on smaller scales. But most of what I do in this scale come from kits. I really like the ones by Susan Karatjas - from SDK. The parts are laser-cut - which is way more accurate than cutting them with a craft or x-acto knife - and they are cut from wood sometimes as thin as paper. Today I'll show you a photo-sequence of me putting one of those kits together: a coffee table. It IS a delicate work, one which demands lightness on your hands, gentle movements, a generous dose of patience and the help of excellent magnifying lenses. But even someone with big hands like me can do it! ;) 

Então espero que você curta este "quase" tutorial e que ele inspire a criar muitas minis!
So, enjoy and I hope this will inspire you too!

AVISO IMPORTANTE: as fotos a seguir foram tiradas com máquina configurada no MACRO. Os objetos parecem MAIORES do que realmente são!!! :)
IMPORTANT NOTICE: the following pictures were taken with the camera set on "MACRO". Objects seem BIGGER than they actually are!!! :)

Solte cada parte cortando pelo avesso o pontinho que a prende ao suporte usando uma lâmina fina. Prenda em uma  dupla-face para pintar.
Remove pieces from backing by gently cutting the tabs (from the back side) using a razor blade. Place them on double sided tape to work or stain.

Aplique um pouco de cola. Se não tiver este aplicador, use um palito.
Apply some glue on the center of the table, on the back side. Use this kind of applicator or a toothpick.

Com uma pinça, centralize e cole a guia na parte de baixo da mesa.
With the help of tweezers, center and glue the spacer to the bottom of the table.

Aplique cola na lateral onde virão as "pernas" Isso na foto é MUITA cola!!! Use menos...
Apply some glue to the side where the "legs" will come. This is TOO much glue. Use less...

Posicione uma das laterais/pernas com a pinça.
Position one of the sides/legs with the help of tweezers.

Corrija a posição para que fique em ângulo reto com auxílio de um palito.
Coax into an upright position with help of a toothpick.

Faça ficar rente ao espaçador com auxílio de algo reto, como um pedaço de madeira.
Make sure it's flush with the spacer using something straight. 

Cole a outra lateral (perna) do mesmo modo.
Glue the other side the same way.

Use a lâmina com cuidado para retirar da fita dupla face.
Use the reazor blade to gently remove from double-sided tape.

Se for pintar, pinte a parte de baixo primeiro. Deixe na fita dupla-face para isso.
If you are painting, keep it on the double-sided tape. Paint back/bottom side first.

Aqui está a mesa pronta e pintada. Veja como é pequena em comparação com o dedo!
Here is the coffee table finished. See how small it is, compared to my index finger?

Passei um fio de tinta dourada e verniz brilhante para parecer laqueado.
I applied a thin line of golden paint and then triple thick varnish, to look like lacquered

Duas versões da mesma mesa.
Two finished versions of the same table.
DICAS IMPORTANTES:
  • Ao retirar as partes do suporte em que vêm, é bom segurar com o dedo para evitar que "saiam voando" e sumam! Retire as partes à medida em que for usar, para não perder ou quebrar. São MUITO pequenas!!! E frágeis! 
  • SEMPRE espere secar BEM cada parte colada antes de prosseguir para a próxima. Se não, terá que refazer seu trabalho e a camada de cola que ficar vai fazer ficar feio! Também espere a tinta secar BEM antes de mover do lugar. Saia de perto e vá fazer outra coisa!... :)

IMPORTANT TIPS:
  • When removing from backing, place your finger on the part you are removing to keep from loosing it. They tend to "fly away" and get lost very easily! Remove only the parts you're going to use immediately, so as not to lose or break them. They are VERY small and fragile!
  • ALWAYS let parts dry WELL before moving to the next step. If you rush, you'll ruin your work and will have to start all over again! And trust me, you don't want that extra layer of dry glue on your delicate work! Also wait paint dry WELL before moving parts! Just step away and go do something else! :)


Related

Related Posts Plugin Blogger...